旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � FSYS2 2.20 Documentation � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 FSYS2 is a file and directory manager. It has two windows and each can hold 2,500 files. It was initially developed to make looking after the network at work somewhat easier. Most of the utilities provided in GRUTILS2 are called from within FSYS2. This document will first explain how to configure FSYS2 and then the keys used to operate FSYS2. You must have installed GRUTILS2 as explained in the file README.1ST, and initially run the configuration program. 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � Configuring FSYS2 (FSYS2CFG.EXE) � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 This program can be run from the command line or by pressing the F2 key when in FSYS2. To configure FSYS 2.20, run the program FSYS2CFG.EXE. It will present you at the main menu. Use the up/down arrows to select and enter to confirm. Esc will save your changes and exit. Each menu option screen uses these keys for editing. Tab and Shift Tab move you from field to field. Enter will save your choices, Esc returns you back to the menu. A field with an arrow next to it, you can use the up and down arrowed keys to select one of the options for that field. FSYS2 General Options 컴컴컴컴컴컴컴컴컴컴� Path To Dos Files....Full Path to where the MS-DOS files are stored (usually C:\DOS). Path To GR Utils 2...Full Path to where the rest of the GRUTILS 2 files are stored. Editor File Name.....Full Path and Name of your usual text editor (usually C:\DOS\EDIT.COM for MS-DOS 6) Path To Temp Files...Where FSYS2 stores its .TMP files. This directory must exist while you are running FSYS2 Path For Window 1,2..Default path name for windows 1 and 2. Leaving these fields blank will use the current directory in windows 1 and 2. No Of Screen Lines...Available Options are 25, 43 and 50. (43 Requires EGA minimum, 50 needs VGA) File Delete Action...1 prompt for file deletion or 2 prompts. Xcopy Actions........As I'm somewhat lazy, when you copy directories, it uses MS-DOS XCOPY to do this. A Bare Display will show only the directory being copied. The full display will show the files being copied. Tag All Method.......When you press F9 this decides on what files are tagged. Available Options are Files or Directories & Files Default Sort Type....For sorting the files. You can choose from Name+Extn, Extn+Name, Date, Size, As On Disk (no sort). Sort Order...........Acsending Or Descending FSYS2 Archiver Details 컴컴컴컴컴컴컴컴컴컴컴 FSYS2 supports 3 independant file archivers, the defaults used are for PKZIP LHARC and ARJ. You usually only need to change the location of where the archiver programs are stored on your disk. Archiver Details.....The Name Of The Archiver (PKZIP 2.04g) Extension Used.......The Extension the archiver produces (ZIP) Full Path To Files...The full path to the archiver files Command Line, Add....The command line to add files to the archive This must include [arc_file_name] & [filespec] (PKZIP -a [arc_file_name] [filespec]) Command Line, View...The command line to view files in the archive This must include [arc_file_name] (PKZIP -v [arc_file_name]) Command Line, Unpak..The command line to extract files from the archive This must include [arc_file_name] (PKUNZIP -d [arc_file_name] *.*) Change Colour Palette 컴컴컴컴컴컴컴컴컴컴� This option will allow you to change the default screen colours used by FSYS2. Revert To Default Cols 컴컴컴컴컴컴컴컴컴컴컴 This resets the colour used to the defaults and then allows you to change the colour palette (as above). 旼컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴커 � Operating FSYS2 2.20 � 읕컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴켸 Moving Around in FSYS2 컴컴컴컴컴컴컴컴컴컴컴 Both windows in FSYS2 can have different paths. To move from one window to another, you can use the left/right arrow keys or the Tab/Shift Tab keys. When you have changed window, the path for this window becomes the current drive and directory. The Active window will have a much thicker border than the inactive window. To move from file to file, you can use the Up/Down arrows , the PgUp/PgDn and Home/End keys. If you wish to work with a selection of files, then pressing the T key will Tag or UnTag the current file/directory. A tagged file is a diffent colour to the normal colours for displaying files. If you wish to Tag All Files, then pressing the F9 key will tag all the files (and directories if you configured FSYS2 to include directories as well). Pressing the F10 key will untag all files. The currently selected file is highlighted a different colour to the rest of the files. These keys only apply when there are files in the active window 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� A - Set Attributes. This works on a single file or tagged files. Simply key in or delete the text for the attributes. These can be a combination of R-Read Only, H-Hidden, S-System, A-Archive. This will also work with directories. C - Copy Files/Directories. These work on tagged files and a single file. Files are copied from the active window to the destination you specify. If you include a file name in the destination then you cannot include directories in the files to copy. If a sub directory is to be copied, then the DOS program XCOPY is used to copy the directory. When specifying the destination, you can use the constants 1: and 2: to represent the paths in Windows 1 & 2, ie Window 1 is in D:\PROGRAMS then 1: will be D:\PROGRAMS (backslashes are put in by FSYS2). Delete - Deletes Files. This works on a single file or tagged files. If a directory is to be deleted, then BIGERASE.EXE is used to delete the directory structure. E - Edit the current highlighted text file using the editor of your choice. T - Tag/UnTag the current File. B - Produces a text file FSYS2TAG.BAT that contains a list of any tagged files. examples :FILENAME.TXT\ The reason for putting a : and a \ in the filename is so that it can be replaced quickly using an editor. For example, you could replace the : with COPY and the \ with C:\ so the line would read COPY FILENAME.TXT C:\ This is mainly for my use as I tag various file to do various operations with. F9 - Tag All Files. F10 - Untag All Files. V - Views a file. This can be GIF, or an archiver extension you specified in the configuration of FSYS2. Any other file is assumed to be a text file and the file viewer FILEVIEW.EXE is used to view the file. U - Extract (Un-Zip) the currently highlighted archive file. You must have configured the archiver in the configuration program first. Z - Create Archive (Zip-Up). This will allow you to create an archive file from the files you have tagged or by entering a given file specification. P - Print File (or tagged files). You are asked for the printer port 1-3. This WILL ONLY WORK WITH TEXT FILES. No form feed characters are sent after the file has been printed. L - Directory Listing. This will allow you to send the list of files to the printer, or you may specify a text file to hold the results. These keys are available at all times 컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴컴� D - Select New Drive. The active window will read the files for the newly selected drive. K - Show keys used in FSYS 2.20. The file viewer FILEVIEW.EXE is used to load up FSYSKEYS.TXT. M - Enter MS-DOS command. Leave the command blank to run COMMAND.COM or type in a valid MS-DOS command. When specifying the command, you can use the constants 1: and 2: to represent the paths in Windows 1 & 2, ie Window 1 is in D:\PROGRAMS then 1: will be D:\PROGRAMS (backslashes are put in by FSYS2). N - Make New Directory. The new directory will be created off the current directory in the active window. X - Enter New Path. You are then asked to key in a new path for the active window. Q - Quits FSYS 2.20. When returning to the DOS prompt. The current path will be the path in the active window. S - Change Sort Order. You can sort by name and extension, extension and name, date and time, file size, or show the files as they appear on the disk. You then select ascending or descending order. The configuration file is then updated. F1 - View the text help file. F2 - Configure FSYS 2.20 F3 - Display Disk Tree of current path. The directory can then be changed by scrolling up and down the directory tree F5 - Re-Reads both directories. Needed if you are working with floppy disks. F6 - Disk Space Used. Shows the total files and disk space used in the current directory and all sub directories.